technical data sheet 1 / 4 male coaxipack 6 ways 4 right angle coa r694.251.114 solder type 2.5 series : mcc2 issue : 0627 b in the effort to improve our products, we reserve t he right to make changes judged to be necessary. all dimensions are in mm. . . po ao components body center contact outer contact insulator gasket others parts - - materials brass beryllium copper bronze peek , ultem - liquid cristal polymer - - plating ( m m ) nickel 2 npgr npgr - - -
technical data sheet 2 / 4 male coaxipack 6 ways 4 right angle coa r694.251.114 solder type 2.5 series : mcc2 issue : 0627 b in the effort to improve our products, we reserve t he right to make changes judged to be necessary. packaging specification standard unit other 25 w option contact us electrical characteristics environmental impedance 50 w operating temperature -25/+125 c frequency 0-6 ghz hermetic seal na atm.cm3/s vswr 1.20* + 0,0000 x f(ghz) maxi panel leakage na insertion loss 0.2 ? f(ghz) db maxi rf leakage - ( - - f(ghz)) db maxi voltage rating 500 veff maxi dielectric withstanding voltage 750 veff mini insulation resistance 5000 m w mini other characteristics assembly instruction others : vswr optimized between dc to 3ghz mechanical characteristics center contact retention axial force C mating end 6 n mini axial force C opposite end 6 n mini torque na n.cm mini recommended torque mating na n.cm panel nut na n.cm mating life 500 cycles mini weight 81,5600 g
technical data sheet 3 / 4 male coaxipack 6 ways 4 right angle coa r694.251.114 solder type 2.5 series : mcc2 issue : 0627 b in the effort to improve our products, we reserve t he right to make changes judged to be necessary.
technical data sheet 4 / 4 male coaxipack 6 ways 4 right angle coa r694.251.114 solder type 2.5 series : mcc2 issue : 0627 b in the effort to improve our products, we reserve t he right to make changes judged to be necessary. place the coax connector on the pcb place correctly the pcb between the punch and the n est of the press. in case of multiple housing configuration , use a p unch and a nest large enough to cover all the housi ngs. press on the plastic housing(s) with the punch unti l the complete insertion of the fixing stud into th e pcb. solder the legs on board radiall do not recommend to use more than 3 modules on the same motherboard and cant be held liable o f any connection defect when more than 3 modules are impl emented on the board punch pcb connector punch or nest nest press 100n fixing stud nest punch solder legs
|
